Peavey Classic 30 (Chinese) jewel light fail.

[Oldmactech]

I replaced the power supply 2yrs ago, all works fine with light to moderate home use.
Noticed the jewel light LEd was blinking and now it’s either really dim or not lit entirely.
Not critical but wondering if a symptom of looming other failures?
thanks.

[The Dude]

I don't see the LED in the schematic, but my recollection is that it runs from a low voltage DC supply- supply, dropping resistor, LED, ground. Check, supply, check resistor, check LED, check connections.

[Tom Phillips]

I don't see the LED in the schematic...

I noticed that too.
I.e. the available Peavey schematics don't show the complete power supply section.