I have one of these in front of me. The amp wont switch channels, and it is working as if all gains/volumes are on 10.
This clearly points to the switching LDRs, I believe.
I actually ran a wire from the ground lug of a volume pot to the chassis, and effectively got the dirty channel to work with a working Volume control(albeit with the gain "stuck" at 10)
I need help finding the right ones. Here's a thread where someone had a similar problem, and found a suitable replacement at Newark, but that was 12 years ago and that part is no longer available.
I don't know too much about these things, so I'd rather get some help and get the right part . The original part was Vactec 21L915
Thread : https://el34world.com/Forum/index.php?topic=11624.0
Schematic: https://el34world.com/charts/Schemat...uper_60all.PDF
Thanks!
This clearly points to the switching LDRs, I believe.
I actually ran a wire from the ground lug of a volume pot to the chassis, and effectively got the dirty channel to work with a working Volume control(albeit with the gain "stuck" at 10)
I need help finding the right ones. Here's a thread where someone had a similar problem, and found a suitable replacement at Newark, but that was 12 years ago and that part is no longer available.
I don't know too much about these things, so I'd rather get some help and get the right part . The original part was Vactec 21L915
Thread : https://el34world.com/Forum/index.php?topic=11624.0
Schematic: https://el34world.com/charts/Schemat...uper_60all.PDF
Thanks!
Comment