Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Carvin HT150 power amp not powering on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carvin HT150 power amp not powering on

    Hi all, recently purchased a used Carvin HT150 power amp, was unable to use it until yesterday. Unit was described as working but is not powering up, green/yellow light does not light up. when on switch is activated you CAN hear a slight hum and if i press the eq expand button there is an audible pop. I have tried 2 plug ins but don;t know what to try next. the single fuse looks brand new. Any ideas would be appreciated.

  • #2
    Could be anything.
    If through fleabay, report it as not working otherwise, good luck ... unless you know a good Carvin guy who can fix it for you.
    Support for Fender, Laney, Marshall, Mesa, VOX and many more. https://jonsnell.co.uk
    If you can't fix it, I probably can.

    Comment


    • #3
      Here's a schematic link:

      https://www.audioservicemanuals.com/...chematic-1.jpg

      It looks like a relatively simple chip output amp. As always, check power supplies first.
      "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

      Comment

      Working...
      X