Ampeg BT15 blowing fuse

[pontiacpete]

I’m trying to use google chrome for the first time to be on MEF, and I don’t know how to open your schematic. The schematic I posted is a picture of what was put glued to the inside of the chassis by ampeg, I suppose.

[pontiacpete]

Finally able to open it. Yes your schematic looks a lot more like this amp than the one inside of the chassis.
So can I use mj15024 for all of the 10003s or is that a bad idea?

[g1]

The MJ15024 should be fine for the outputs.

[pontiacpete]

How about the 2n3415 that is also shorted. It’s part of the bias circuit. Is there a good sub for this,