Modified Magna M192-5 blocking distortion

[Delta362]

...I thought you wanted the self-balancing as with the original circuit.

Probably bad wording on my part in the initial post. I was attempting to keep the power amp section the same as the original design, but with a new OT to allow for multiple impedances. Given the state of the amp when it came in, I had to removed so much of the original components that I went with what I found as a legible schematic (Slucky's). Looking at the Slucky (Wolfgang Iden) schematic vs the W. Mize schematic, I see they are slightly different in their output topologies. My apologies for misleading you, but I do follow what you were suggesting about the feedback connection.