Tweet
Hi
I have a 1001rb - the crossover section for bi-amping has not been working properly - the normal stage has so it hasn't been an issue until I baught a GK NEO212 to use the bi-amp section with.
I had a tech look at it and he renewed a couple of dry solder joints - however on power up the blue light comes on by all I get is a high tone (like a warning tone) out of the speakers and no output - 1/2 inch jack or speakon - full range or bi-amp on the cab. The blues light does noit switch to red so it seems like the internals are OK otherwise protection circuit kicks in.
Any ideas?
thanks
I have a 1001rb - the crossover section for bi-amping has not been working properly - the normal stage has so it hasn't been an issue until I baught a GK NEO212 to use the bi-amp section with.
I had a tech look at it and he renewed a couple of dry solder joints - however on power up the blue light comes on by all I get is a high tone (like a warning tone) out of the speakers and no output - 1/2 inch jack or speakon - full range or bi-amp on the cab. The blues light does noit switch to red so it seems like the internals are OK otherwise protection circuit kicks in.
Any ideas?
thanks