Peavey Renown 400 saturation mod? Enzo?

[bmdodge]

I was wondering if it is possible to make the saturation/distortion foot switchable?? Enzo?? Is it possible to just interrupt the signal ,either pre or post the saturation pot and wire in a 1/4 jack?? Does anyone have the wiring diagram for the original footswitch ? It's a 6 pin din plug.
Thanks in advance...

[Enzo]

The footswitch wiring is on the amp schematic.

I don;t know what you mean by making the saturation switchable. The channels already switch. Saturation is just an overdrive control, it isn't off/on, it is a variable control.

[bmdodge]

Thanks alot for the schematic. I was trying to see if there was a way to make the saturation be on/off. A way to make it more like clean channel,lead channel with or with out distortion. A way to interupt the signal before the saturation circuit ? and then back ? possible??
thanks again

[bmdodge]

I would like to work like the reverb does, variable but also on or off...???