Hi,
I am into converting my Fender 79’ Deluxe Reverb into Pro Reverb Ultralinear 70w version.
I found on line the power and output transformer , but I am wondering on what
would be the exact instructions to install the ultralinear OT , what would be the original
match for filter caps ( I guess that the two 100uf – 350w and three 20uf -50w with 220k , 4,7k and1k resistors solution would be fine )
Another important point for me is : how to arrange the power supply section ?
How many diodes and resistors values ?
I wish to adapt a rectifier tube to the amp.
The actual power supply cap is a spargue 100uf-100v
the bias pot is already fixed as a true adjustable bias
I read that an ultralinear OT have screen grid taps so this means that it cannot just be replaced and installed the same connections cables of my original Deluxe? May somebody can help me to understand how to install the OT ?
I’m looking on the web for some layouts but cannot find anything for the ultralinear Proreverb 70w or
Bassman 70w , just found some schematics.
I my deluxe already have the bigger choke , a new Legend Eminence 150w speaker.
I love the 70w version of fender amps for the clean and I’m using my amp only for Jazz so I never need
distorted sound and in that specific case I would use a pedal.
thank you in advance , John
I am into converting my Fender 79’ Deluxe Reverb into Pro Reverb Ultralinear 70w version.
I found on line the power and output transformer , but I am wondering on what
would be the exact instructions to install the ultralinear OT , what would be the original
match for filter caps ( I guess that the two 100uf – 350w and three 20uf -50w with 220k , 4,7k and1k resistors solution would be fine )
Another important point for me is : how to arrange the power supply section ?
How many diodes and resistors values ?
I wish to adapt a rectifier tube to the amp.
The actual power supply cap is a spargue 100uf-100v
the bias pot is already fixed as a true adjustable bias
I read that an ultralinear OT have screen grid taps so this means that it cannot just be replaced and installed the same connections cables of my original Deluxe? May somebody can help me to understand how to install the OT ?
I’m looking on the web for some layouts but cannot find anything for the ultralinear Proreverb 70w or
Bassman 70w , just found some schematics.
I my deluxe already have the bigger choke , a new Legend Eminence 150w speaker.
I love the 70w version of fender amps for the clean and I’m using my amp only for Jazz so I never need
distorted sound and in that specific case I would use a pedal.
thank you in advance , John
Comment