Tweed Vibrolux, want to reduce mids a little.

[AtomicMassUnit]

The amp sounds pretty great as is, but I'd like to reduce mids a tiny bit to match up better with my mid heavy guitars and pedals. It's a vintage '57, and has Sozo blue caps, a Weber 12a150 speaker, National 6v6s, NOS Tungsol V1, and RCA blackplate V2, and a Classictone OT (original was blown). All cap and resistor values are in spec. Any suggestions?

[riz]

I would focus on finding a speaker swap that gives you what you want first, before digging into the circuitry.

[imaradiostar]

Sounds like a fabulous amp for a different sound! Maybe you should buy/build a blackface Fender as they're known for a more prominent mid scoop.

jamie

[HTH]

a t-filter will give you what you want, but I'd try some of these options first which leave the amp alone...

* preamp valves that have a more relaxed midrange
* Jensen-type speaker with scooped mids
* EQ pedal to sculpt the mids to taste (this is the option I'd go for first).

Those TungSol and RCA preamp valves are quite midrange-heavy as well, so something like NOS GE's or Sylvania 12AX7s would give you a little mid-scoop.