Power Transformer forVox Pathfinder 15R

[littlericky]

I've looked online but have had no luck. Looking to upgrade the ic as described below. Thanks

If you plan to use a TDA2050 instead, it calls for a +/- 25V supply, so you will need a 17.5-0-17.5 VAC (50VA) transformer (18-0-18 is still OK).

[52 Bill]

I've looked online but have had no luck. Looking to upgrade the ic as described below. Thanks

If you plan to use a TDA2050 instead, it calls for a +/- 25V supply, so you will need a 17.5-0-17.5 VAC (50VA) transformer (18-0-18 is still OK).

How about this one QC6630-R: JAMECO VALUEPRO: Power Supplies & Wall Adapters

[Bruce / Mission Amps]

Is the power transformer for that amp the same as Pathfinder 10? etc.... if yes I have one.
Oh I see, you are looking to upgrade the PT for the higher current chip.
Nnever mind...

[littlericky]

Thanks for the Offer Bruce.

52 Bill. Am I reading the spec on that incorrectly? 36 -nc- 0

[52 Bill]

Thanks for the Offer Bruce.

52 Bill. Am I reading the spec on that incorrectly? 36 -nc- 0

The catalog reads 36vct, so that would be 18-0-18. The spec sheet says 36-nc-0, which would be wrong, but I'd trust the catalog page over the Chinese spec sheet. If it's wrong when you get it you've got a good case for a return. You could email them and ask, or you can order one from Hammond. They have a similar transformer available for a little more money.