Tweet
I recently acquired a Marshall trans, and need some help identifying it. Its made by Dagnall electronics, part# TXMA 00080. It has 4 solder joints on one side and six on the other. I thought the guy told me it was an audio trans, for a 50 watter. So I need the wiring diagramfor it. I hope thats the case. I would like to do a swap in my Sovtek Mig-50.
-
-
Dagnall Transformer
Maybe try http://www.dagnall.co.uk
I couldn't find the part # but a quick email
may get the information
Luck -
Trans help
Thanks for the web address, Ill contact them and see what they say. Thanks DannyComment
-
Or ask Marshall what that part is used in. That part number is a MArshall number. I'll see if I can spot it in my data.Education is what you're left with after you have forgotten what you have learned.Comment
-
Trans help
Dagnall emailed me back and said to contact Marshall. So I just sent them an email, so hopefully I get something back in the next day or so. I hope they will send the wiring diagram as well. Ill let you guys know what they say. Thanks again DannyComment
-
That is a power transformer for a DSL 401 amplifierWarning! Some Electronics devices contain lethal voltages that can kill you. If you do not feel qualified to work with dangerous voltages, refer your repairs to a qualified technician. By giving you online advice, I am assuming no liability for any injury or damages you might incur through your own actions.Comment
-
DSL 401 power transformer it is.
TXMA00080 783-335 DT DSL401
As Used: Power TransformerComment
Comment