What are these wires? (PI)

[Natman]

Here is something I have drawn up in paint. It is an amp I looked at and drew the layout/schematic minus a few connections which I *thought* I could figure out later. V3a is a half-tube tremolo like a Princeton, V3b is the split-load phase inverter.

What has me puzzled is the 2 wires coming off pins 7 and 8 (circled). I am still a newb at this, but for the life of me I can't figure out where they go/come from! They ran under the board and now the amp is gone. I normally build by just copying schematics but I don't fully understand all the sections or how they work.

Any guesses?

Thank you!

[Jazz P Bass]

Paint PI Caricture

If that is the phase inverter circuit, the two pins in question are Pin 7 (grid) & Pin 8 (cathode).
Pin 6 (plate)is the top output (through a capacitor) to one output tube.
Pin 8 (cathode) is the bottom output (through a capacitor) to the other output tube.
Pin 7 (grid)is the input which would come from the previous stage (through a capacitor).

[Natman]

That helps a lot! Thanks