Hi,
I've got a Power Transformer here, no load just hooked up to the wall I have about 400 - 0 - 400
7.3V Filament and
5V on the well 5V.
I'm expecting that this will drop to 300 0 300 under load.
my plan is to use this for an AC 15, but I fear is going to be too high a B+ for a power supply with an EZ81 or is it?
I've got a Power Transformer here, no load just hooked up to the wall I have about 400 - 0 - 400
7.3V Filament and
5V on the well 5V.
I'm expecting that this will drop to 300 0 300 under load.
my plan is to use this for an AC 15, but I fear is going to be too high a B+ for a power supply with an EZ81 or is it?
Comment