Tweet
I have gutted a Bedrock 651 and replaced trannys with beefy Heyboers. The amp was toasted from someone spilling a drink into the amp. My problem is with the wiring of the power switch which also lights up and the panel mount power connector with built in fuse. I am attaching both the scheme and a pic of the innards. I guess my confusion lies with the previous way the switch and power were connected and how I need to do it with the new PT. The power has 4 quick disconnects(lugs) because you can flip the fuse box one way or the other(100v or 120v) which corresponds to 2 different lugs continuity. The original utilizes all the lugs and i dont know why or how but I am sure someone here can explain it to me from looking at the scheme and the different primary taps. The lighted switch is a Arcolectric 5503ab and has 100v for the lamp printed on the switch. Will there be a problem utilizing this lighted switch with 120v primary taps?
Attached Files
Comment