simulating accutronics reverb in circuit maker?

[firmdragon]

Hey,

I'm working on a reverb circuit and am trying to simulate/analyze it in circuit maker. Anyone know how i would go about simulating the reverb tank? I figure a resistor and inductor in series would be a good place to start but other than that i'm a little lost. i'm open to the idea of using another software package if it'll get the job done as well.

thanks

[Gingertube]

Go here:
::::::::: Accu Bell Sound Inc :::::::::
Click on the Applications Tab and you will find impedance charts, suggested schematics etc.etc. All the raw data you need to calaculate that inductor value (I assume you are trying to model the drive coil of the tank).
Another software package won't help. If you can't do it with circuit maker you won't be able to do it with a $10,000 Microcap Simulator either.
Cheers,
Ian