Custom D-Lux Reverb design. (Thanks Chuck!)

[Dagan8]

Hello

I have finished the design of a circuit that I would like to drop into a 2 X 12 combo chassis that I have. The amp is a 2 channel with reverb on both channels. 1st channel is the classic AB763 BF voice. 2nd channel is a D-Style voice. My goal is to use this amp mainly for cleans. I have an 18watt EL84 amp that handles all of my dirt although I may try some dirt pedals in front of this amp for kicks. I had some troubles with the mixing section but with the help of a friendly member of this forum I think we found a good solution or 2. I am going to provide some extra eyelets in that area to experiment with some of the different mixing ideas. I will start with the mixing design in the attached.

If anyone sees any major issues/concerns with the schematic please let me know and I am still learning. Any feedback is appreciated



Cheers

[lowell]

This looks cool. Be interested to hear how it sounds. FYI your screen and plate supply points are reversed. You don't want your screen voltage higher than your plates.

[Dagan8]

Hi Lowell

Good catch! I will edit!

[Dagan8]

Revised schematic.