Cable for LaMar Mastervolume?

[shocki]

Lar/Mar PPI-MV - MetroAmp Wiki

I would like to do this mod. I have shielded cable but just with one conductor. I have no idea where to get 2 conductor shielded cable that is rated for 300V.
Should I try to get 2 conductor cable or should use two 1 conductor shielded cables instead?

Thanks.

[big_teee]

Lar/Mar PPI-MV - MetroAmp Wiki

I would like to do this mod. I have shielded cable but just with one conductor. I have no idea where to get 2 conductor shielded cable that is rated for 300V.
Should I try to get 2 conductor cable or should use two 1 conductor shielded cables instead?

Thanks.

I did the mod and made my own cable.
I took some braided cable and threaded 2 wires in the braid.
The cable is short so this is not that hard to do.
When finished, I put a piece of heat shrink over the braid and shrunk it down.
Looks and works great!
T

[shocki]

ahh this should work
http://www.thomann.de/gb/sommer_cable_primus_bl.htm

[Enzo]

I wouldn't order something just to get a few inches of cable. Just run two pieces of single conductor.

[stormbringer]

For future reference (or for your LarMar, in case you want to order more wire), I started a thread on this very question a while ago:

http://music-electronics-forum.com/t31748/

[clyde1]

You don't need shielded cable.

[big_teee]

shielded wire won't hurt, and they show it on the mod.