JJ 6V6's and output transformer.

[pdf64]

If Dave's numbers are plugged into Nick's interactive data sheet Interactive Valve Data Sheets it all seems to look ok, assuming ~8k for a 6V6 p-p pair.
Sag in the B+ at high signal levels will act to make things a bit easier on the 6V6.

[wozt]

If Dave's numbers are plugged into Nick's interactive data sheet Interactive Valve Data Sheets it all seems to look ok, assuming ~8k for a 6V6 p-p pair.
Sag in the B+ at high signal levels will act to make things a bit easier on the 6V6.

pdf64 can you plug my numbers in and get back to me. Fired the amp up and it's fine (it's lacking volume so I'll start a thread for help).
So I got HT 380, 270ohm rk @22v. Using an 8k marshall OT.