Hi,
I'm using a cheap USB scope to check the output sine wave form of amps. At higher resolution I noticed those strange looking parts of the sine wave and was wondering what could be the reason for that?
It's a 2x6V6 power amp, voltages are around 430V, FB is 27k resistor from the 16 Ohm tap, OT is Hammond 1760H.
I'm using a cheap USB scope to check the output sine wave form of amps. At higher resolution I noticed those strange looking parts of the sine wave and was wondering what could be the reason for that?
It's a 2x6V6 power amp, voltages are around 430V, FB is 27k resistor from the 16 Ohm tap, OT is Hammond 1760H.
Comment