Garnet Herzog questions

[olddawg]

If you are going to the trouble of building one of these.. I would strongly suggest you find a Champ or a VJ or some little 5 watter and simply put a voltage divider on the speaker out and try it. That’s virtually what these are. They are a real one trick pony and difficult to use.. which is why you don’t see them used much btw. I guess you could build a champ with a switch to convert it to this mode? Or you could get a VJ head from CL for $80 and convert it.

[mhuss]

That's not the way I read it. I see a direct connection to the input/output junction in bypass mode to the 150K. Correct me.

The top post schematic has a DPDT switch. Here is how the signal is connected and bypassed:

Connected: Bypassed:

The circuit input and output are not connected at all in the bypassed state.

[g1]

The top post schematic has a DPDT switch. Here is how the signal is connected and bypassed:

Connected: [ATTACH=CONFIG]54078[/ATTACH] Bypassed: [ATTACH=CONFIG]54079[/ATTACH]

The circuit input and output are not connected at all in the bypassed state.

The top post links to a thread on another forum. That thread has a couple different Herzog schematics. Randall mentioned the one with the int. and ext. fuse, so I posted that schematic in post #5.
As far as I know, that is the one being discussed.
Perhaps Randall can clarify.

Here it is again: