Tweet
Hi all, I have a Marsh/ Mojotone tweed champ kit that I put together a while back, but want to change it to the Weber 5f2h circuit.
1. I would like to drop the choke due to space constraints, but after scouring the internet, I have come up empty handed on what to use for adding a resistor in its place? Or would I just change the resistor between the 40uF and 20uF filter caps? Is there a way to calculate this?
2. The Weber 5F2H uses a 100mA power transformer, and I have the Heboer 760ex rated at 75mA. Ok for a se single KT 66 setup, or close to the hairy edge?
3. Want to add the schematic here, but not sure how to do it....
1. I would like to drop the choke due to space constraints, but after scouring the internet, I have come up empty handed on what to use for adding a resistor in its place? Or would I just change the resistor between the 40uF and 20uF filter caps? Is there a way to calculate this?
2. The Weber 5F2H uses a 100mA power transformer, and I have the Heboer 760ex rated at 75mA. Ok for a se single KT 66 setup, or close to the hairy edge?
3. Want to add the schematic here, but not sure how to do it....
Comment