Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

2 cascaded push pull

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2 cascaded push pull

    Hello,
    i want to know if this is possible ? See schematic ...
    The goal is to have el84 overdrive without attenuator or beeing deaf...
    The preamp would be a trainwreck style or plexi.
    Attached Files

  • #2
    Originally posted by tepsamps View Post
    Hello,
    i want to know if this is possible ? See schematic ...
    The goal is to have el84 overdrive without attenuator or beeing deaf...
    The preamp would be a trainwreck style or plexi.
    Certainly plausible, but unclear if the values are optimal (I would simulate it) or if it will achieve your OD tone goals.
    OD with spkr/OT is different than OD with R load. There are some prior threads that discuss spkr simulators for purposes like this.
    You might want to look at those. In the end, no matter what you read or draw, you won't really know how it sounds without trying it.
    “If you have integrity, nothing else matters. If you don't have integrity, nothing else matters.”
    -Alan K. Simpson, U.S. Senator, Wyoming, 1979-97

    Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law.

    https://sites.google.com/site/stringsandfrets/

    Comment


    • #3
      Very similar to what is done a fair bit in HiFi - with triode strapped EL84 as the phase splitter and a centre tapped inductor load.
      L:ike this:
      http://turneraudio.com.au/8585-amp-october-2006.html
      Cheers,
      Ian

      Comment


      • #4
        Originally posted by uneumann View Post
        or if it will achieve your OD tone goals.
        OD with spkr/OT is different than OD with R load.
        So bad! I'd like to try it anyway...
        Thanks

        Comment


        • #5
          Originally posted by Gingertube View Post
          Very similar to what is done a fair bit in HiFi - with triode strapped EL84 as the phase splitter and a centre tapped inductor load.
          L:ike this:
          http://turneraudio.com.au/8585-amp-october-2006.html
          Cheers,
          Ian
          If you've got a centre-tapped inductor, you don't need a phase splitter.
          Attached Files
          Originally posted by Enzo
          I have a sign in my shop that says, "Never think up reasons not to check something."


          Comment


          • #6
            True with the Garnet circuit. The CT inductor is actually an autotransformer wired to provide phase inverted outputs.

            But the 8585 circuit is different. Here the EL84s are wired as LTPI and the inductor is used to increase output swing at reduced losses.
            - Own Opinions Only -

            Comment


            • #7
              By the way, does anyone else's anti-virus go nuts over the turneraudio website?
              Originally posted by Enzo
              I have a sign in my shop that says, "Never think up reasons not to check something."


              Comment


              • #8
                Originally posted by g1 View Post
                By the way, does anyone else's anti-virus go nuts over the turneraudio website?
                Same here. Got an Avira alert that some access was blocked. Made me run a complete system scan.
                - Own Opinions Only -

                Comment


                • #9
                  I just went and mine did not react.
                  Education is what you're left with after you have forgotten what you have learned.

                  Comment

                  Working...
                  X