I'm attempting a few mods on my '68 Traynor YBA-1 Bassmaster - one in particular is a "Channel Defeat" mod that is designed to improve the "transient fidelity" by removing unnecessary elements from the signal path. It calls for replacing the 1M volume pots with 4M-A push-pull pots so that you can pull the switch to eliminate one of the channels.
There is a nice schematic on this mod here on page 4:
http://www.kilback.net/Traynor_Tweaks_rev12_sk2007.pdf
The trouble is, I don't understand how push-pull pots work. I don't know how to wire this thing up so I was hoping someone here could help me out. I do understand that it is a pot with a DPDT switch incorporated with it but I haven't been able to find any detailed explanation as to how they are wired up.
thanks in advance
M
There is a nice schematic on this mod here on page 4:
http://www.kilback.net/Traynor_Tweaks_rev12_sk2007.pdf
The trouble is, I don't understand how push-pull pots work. I don't know how to wire this thing up so I was hoping someone here could help me out. I do understand that it is a pot with a DPDT switch incorporated with it but I haven't been able to find any detailed explanation as to how they are wired up.
thanks in advance
M
Comment