Engl P-ball Lo lead channel schematic?

[Tubis]

Anyone have the correct shematic to the Lo lead channel from the input to the loopdriver of the Engl Powerball.
And the "true" schematic, not the ones Engl put out on the net that has alot of errors and missing components.
I have i customer that wants a complete rippoff of that channel.
I could off course open up a P-ball and draw out the schematic myself but it would save me a lot of time if some person out there had a drawing of it?

[Robert M. Martinelli]

maybe I' ve got what you need

Hi,
Time ago I had to repair a P-ball a friend of mine was using for studio and live performances, I wrote directly to Engl in Germany and they were kind enough to send me the schematics via e-mail.... Having said that, I don' t know if these schematics are the same which can be found on the net or they' re updated /revised versions with error fixes; I used' em to repair that P-ball and I found' em correct, at least in the amp area I worked on. Let me know if you think they can be helpful and I' ll send' em gladly to your attention.
Best regards
Bob

[circuitrix]

Hi ,

Got this directly from the company.

[Gregg]

All ENGL "factory" schematics are known to be fake so don't bother with them. Check out the Sloclone forum they have some interesting stuff on ENGL.

[Tubis]

Hi ,

Got this directly from the company.

yea but its not correct. Engl wont give out the correct schems. I dont need the schem anymore because ive opened up the machine and got the info i need. Your shem is not correct, sorry. If you look at the low freq, response you can see that it will not work at all if you tried that circuit.