Hello!
My tremolux is already built!
itīs base is 5E9 - A schematics (schematics heaven)
but OT is mercury magnetics 5G9 model
it is cathode biased, 2x 6V6JJ tubes
and the rectifier is 5U4GB (also used in 5G9 model)
speaker is Jensen Alnico P12R
There are few problems:
the sound is muffled
there is not much headroom
and it breaks up too early (yet the drive is nice fuzzy)
it means that there is almost no clean sound
(the guitar volume knob doesnīt work well)
So, I thing that the main problem is in the values of the voltages in
the amp because there are any in the schematics
and I have not an opportunity to calibrate the original
maybe the problem is somewhere elsewhere
I donīt know exactly
every reasonable information can help me!!!
many thanks
Martin
My tremolux is already built!
itīs base is 5E9 - A schematics (schematics heaven)
but OT is mercury magnetics 5G9 model
it is cathode biased, 2x 6V6JJ tubes
and the rectifier is 5U4GB (also used in 5G9 model)
speaker is Jensen Alnico P12R
There are few problems:
the sound is muffled
there is not much headroom
and it breaks up too early (yet the drive is nice fuzzy)
it means that there is almost no clean sound
(the guitar volume knob doesnīt work well)
So, I thing that the main problem is in the values of the voltages in
the amp because there are any in the schematics
and I have not an opportunity to calibrate the original
maybe the problem is somewhere elsewhere
I donīt know exactly
every reasonable information can help me!!!
many thanks
Martin
Comment