Ampeg R15-R

[hasserl]

Well, I'm sure the one I had in here had the original PT on it, and I'm sure the voltage were higher than the 360 to 370 range. But since I didn't write any notes, well, I can't say for certain. But I'm also sure that 360 - 370 range will be fine.

FWIW I know I also found an error on Piazza's schematic, no big deal though, but one of the dual triodes had the sections reversed. I think it was V2, the 6SN7.

[chickenPlucker]

FWIW I know I also found an error on Piazza's schematic, no big deal though, but one of the dual triodes had the sections reversed. I think it was V2, the 6SN7.

The schematic for the R12-Rt also has major errors- wrong valves, wrong signal path. If they can't be trusted, what good are they?

[Ted]

So I'm going to aim for 370V.

Put in a Hammond 370HX. It gives a B+ of 365V. 7591As are ticking over at about 13.5W at idle. Sounds incredibly sweet. Reverb and trem clean and subtle .

Thanks for your help guys.

Cheers

TW