Marshall specialist 2046

[gibince]

Hi, i've been giben a 2046 marshall specialist amp few wekks ago but the transformators are missing. Does anybody knows where i can buy it ?
I don't knows a lot about tube amp. i've already replaced every caps and restored the cabinet. I'm only missing the tranformators.

[50bux]

I used a Mojotone USA PT Made for the Gibson Goldtone GA30 in my 2046. Pretty straightforward .The amp is designed for about +380 vdc. Watch that you leave clearance about 1" from the outside of the chassis to clear the cabinet. I set the bias at about -33vdc. Voltages are real close to original and its a better tranny. My output trans and reverb trans were original.