Hartke HA 3500 Fuse Sled Assembley replace help

[phurley]

Recentley purchased a HA 3500 used without a fuse sled inside. Contacted Hartke and got the whole assembley with the power outlet and all. just tried removing the sled from the new assembley and popping it in but no power. so I decided to pull out the old assembley but when I took off the lid there was no diagram of how the wires sliped over the ends on the new one help!

[Jazz P Bass]

Here is the HA3500 schematic.
The two outside legs of the socket are line voltage.
They will attach to the transformer primary.
The center leg is 'Chassis Ground'.
This will get bolted to the chassis.
If you are totally confused as to what is what, please take the amp to a tech.
The chance of shock & or amplifier damage is pretty high if you get it incorrect.

[phurley]

Cool thanks for getting back I knew that it would be a specific wire to specific post but I didn't know if there was an easy way to tell what went where even if I streched out the wires and traced thier origin