Tweet
my vsx-30 had stop turning on and i noticed that the second relay after the transformer is not clicking then i saw that r186 was burned but i can not find the value for the resistor from what i could see it looked like 100 ohms but could someone confirm
-
-
Here is the service manual, https://elektrotanya.com/pioneer_vsx.../download.htmlOriginally posted by you2314 View Post
it looks like a 22ohm 1/4watt, but resistors don't just burn for no reason. There will most likely be other issues a little above my knowledge level.
nosaj
soldering stuff that's broken, breaking stuff that works, Yeah! -
replaced resistor but now nothing happens resistor does not blow and second relay clickComment
-
soldering stuff that's broken, breaking stuff that works, Yeah!Comment
-
the first relay click when i plug it in and the nothing happensComment
-
No lights on receiver? Do you have a multimeter?Originally posted by you2314 View Post
nosajsoldering stuff that's broken, breaking stuff that works, Yeah!Comment
-
"nothing happens"
Come on!
How about some voltage checks.
Sheesh.Comment
-
what points should i checkComment
-
Make sure no speakers are connected. Put your meter leads on one channel set to DC Volts. Turn stereo on while watching meter. Write down numbers before relay clicks and after. Repeat on the other speaker channel..Originally posted by you2314 View Post
nosajsoldering stuff that's broken, breaking stuff that works, Yeah!Comment
-
no speakers are shorted and all voltages are there except for the 5 v on the front panelComment
Comment