Kustom 50-2 Combo Amplifier

[squier51]

A friend of mine gave me an “ Immaculate “ Kustom 50-2 Blue Sparkle Combo Amplifier which has the Kustom Logo Cover that came with it…
it has no tears or cigarette burns on the Tuck and Roll material…
NOW: The problem is that the “ Vibrato-Tremelo “ Push -Pull Potentiometer has a broken shaft that held the knob on front….It’s broken flush with the face of the amp
Its a 3amp/ 125 volt pot that I can’t find anywhere….
Does anyone has Kustom Amps that have this push-pull pot in their “ parts” collection??

[glebert]

Have you seen this post (or maybe you were the poster)? http://www.vintagekustom.com/FUDforu...fbeb0d0dbc96c9

[Enzo]

And the value and taper is...? I assume it is a common 3/8" bushing? SO about 24mm in size>

You need a pot with pull switch. The 3A and 125v rating is just the switch they used, in the amp it doesn't remotely use that much current, so any pull switch will work.

[Jazz P Bass]

The schematic shows the speed control as a 500K.
Taper is not specified.