Fender Frontman pots

[Axtman]

1) Who is the manufacturer of these pots? I do not recognize the symbol.

2) Does anyone manufacture theseFender Frontman pots? I am working on amp that took a face plant and broke (or damamged) every single pot! BTW, the brackets on these pots are smaller than the snap-in pots that are still available.

[Enzo]

Fender part numbers?

Pots for Fender et al are made to order, not off the shelf items anyway.

[The Dude]

If you don't have part numbers, you can probably find them on this page:

https://www.amprepairparts.com/fenderpots.htm#dshaft

[Enzo]

And of the many Frontman models, it would help to know which one it is.

[Axtman]

Fender Frontman 212R (FM 212R). I cannot find a service manual or parts list only the schematic. So I do not know the Fender pot part numbers.

[Enzo]

SOmetimes stamped into the metal of the rear cover around the edge. But not always, of course.

I have some part numbers:

62804 100k 30C drive and drive-treble
69529 100kB Drive-volume
69530 250k 30C drive-bass
69531 50k 15A normal-bass
69532 50kB several
69533 5k 15A normal-middle

That MIGHT help find some.


And when you see "non-serviceable" on a Fender amp, it does NOT mean there are no parts for it , it ONLY means they won't pay us for warranty repairs in the field. They would rather swap it out.

[g1]

Fender Frontman 212R (FM 212R). I cannot find a service manual or parts list only the schematic.

see attached

[Axtman]

Thanks guys for the part code nformation. I will search around.