I recently aquired an Ashdown Electric Blue 130 amplifier for cheap (free).
Not only is the output board blown but it was someone's DIY breadboard experiement. I will not be replacing components on the board because I do not trust it. Instead I would like to find a drop in board.....if possible. The board is powered by about +/- 62 volts and would put out about 130 watts into 8 ohms if working.
![Click image for larger version
Name: IMG_2101.jpg
Views: 260
Size: 1.06 MB
ID: 966309](filedata/fetch?id=966309&d=1660152086&type=medium)
Unfortunately the speaker is blown but I have a speaker I can use. Luckily the preamp works.
Here is the schematic: electricblue130.pdf
Not only is the output board blown but it was someone's DIY breadboard experiement. I will not be replacing components on the board because I do not trust it. Instead I would like to find a drop in board.....if possible. The board is powered by about +/- 62 volts and would put out about 130 watts into 8 ohms if working.
Unfortunately the speaker is blown but I have a speaker I can use. Luckily the preamp works.
Here is the schematic: electricblue130.pdf
Comment