Sovtek 12AX7WA/WB tubes are pretty much the only ones I find that test 20-30%--or less--of nominal value after only a few years use.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
Sovtek 12AX7s
Collapse
X
-
Originally posted by tubeswell View Post... reliable workhorses that they tend to be
Comment
-
Originally posted by MWJB View PostSovtek 12AX7WA have lower amplification factor that most 12AX7 tubes & they are like that from new, this is good for low microphony, but not always so great for tone.
I found that the Sovtek 12AX7WA & WB have always shown low transcunductance even when new. I.e. this has been the case since they were first offered for sale.
Comment
-
I'd love to use the 12ax7LPS for a first stage. Best sounding current production 12ax7 IMHO. Too bad they're all microphonic as hell. I use them for anything but first tube in the preamp. First tube is usually NOS this or that. I still have a couple of RCA gray plates that sound great and aren't microphonic. They were only US $18 when I bought ten of them. Now I see them as high as $70 if they test new and aren't microphonic. I've tried a few production tubes for first stage and liked NONE of them. Probably the least offensive current production 12ax7 for the first stage is the Chinese tubes that Mesa uses. At least to my ears. They do go microphonic with time, but while they last they're quiet, dynamic and actually make the gain they're supposed to. I don't know who makes those though. They're the ones with the little shield around the plates."Take two placebos, works twice as well." Enzo
"Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas
"If you're not interested in opinions and the experience of others, why even start a thread?
You can't just expect consent." Helmholtz
Comment
-
Originally posted by Chuck H View PostI'd love to use the 12ax7LPS for a first stage. Best sounding current production 12ax7 IMHO. Too bad they're all microphonic as hell. I use them for anything but first tube in the preamp. First tube is usually NOS this or that. I still have a couple of RCA gray plates that sound great and aren't microphonic. They were only US $18 when I bought ten of them. Now I see them as high as $70 if they test new and aren't microphonic. I've tried a few production tubes for first stage and liked NONE of them. Probably the least offensive current production 12ax7 for the first stage is the Chinese tubes that Mesa uses. At least to my ears. They do go microphonic with time, but while they last they're quiet, dynamic and actually make the gain they're supposed to. I don't know who makes those though. They're the ones with the little shield around the plates.
The MESA-tube is most likely a Shuguang. I think that TAD sells them rebranded as their 7025 High Grade.
Comment
-
Originally posted by greekie View PostI think that TAD sells them rebranded as their 7025 High Grade.
EDIT: Well, some research shows that most NOS sellers are onto the National rebrand and have taken to IDing the tubes by characteristics and then selling them for prices akin to the original manufacturer. So a "National" 12ax7 made by Amperex sells for about the same price as an Amperex.Last edited by Chuck H; 02-19-2012, 03:11 AM."Take two placebos, works twice as well." Enzo
"Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas
"If you're not interested in opinions and the experience of others, why even start a thread?
You can't just expect consent." Helmholtz
Comment
Comment