Tweet
This is my first venture on to this forum. I hope it will be a long and fruitful engagement.
I have a plan to wind my own OPT. for a Mullard 5-10 design.
This is a pretty basic question.
When we talk about UL taps at 20%, is that 20% from the HT tap point? or 20% from the Anode end?
John.
I have a plan to wind my own OPT. for a Mullard 5-10 design.
This is a pretty basic question.
When we talk about UL taps at 20%, is that 20% from the HT tap point? or 20% from the Anode end?
John.
Comment