I got one of these pedals in real good shape, But It had a TDK inductor which didn't sound nice with OD.
S0....
- I converted to true bypass
- Replaced Scratchy Pot with CTS Icar taper
- Put In a Whipple Inductor
Ever since the mod occasionally the pedals signal is replaced by a loud SHHHHHH sound when engaged, (which responds to rocker movement)....
Though usually it works correctly.
The legs on the whipple didn't match well with this old wah, They snapped off by bending them only couple of times. I replaced them with legs made from resistor ends. I don't think that's the problem though.
Is that a bad filter cap? should I put back the old switch? Change the electrolytic caps?
Anybody seen this?
S0....
- I converted to true bypass
- Replaced Scratchy Pot with CTS Icar taper
- Put In a Whipple Inductor
Ever since the mod occasionally the pedals signal is replaced by a loud SHHHHHH sound when engaged, (which responds to rocker movement)....
Though usually it works correctly.
The legs on the whipple didn't match well with this old wah, They snapped off by bending them only couple of times. I replaced them with legs made from resistor ends. I don't think that's the problem though.
Is that a bad filter cap? should I put back the old switch? Change the electrolytic caps?
Anybody seen this?
Comment