Boss BD-2 o output after mods

[Tage]

So I swapped out one resistor and one cap in my Blues Driver, trying to get a tighter and slightly Marshalish feel from it. I changed C22 to 47nf and R36 to 39k. Ive checked all my wires from the pots and in/outs to the board and they are all good. The pedal bypasses normally but once it is engaged there is no sound it just kills the signal.

Has anyone else had this kind of experience with a boss pedal?

[Tage]

Got it figured, those 1/4 watt resistor codes are sure hard to read...