So, I have this RC20 loop station that I have fixed... Well it was really just the means of resetting the phrase memory banks 1-11. It was all malfunctioning when I got the unit and did not work at all. I was reading on another site where the guy had cracked this combination of codes to reset the unit and it worked. The only problem with the pedal now is the tempo guide effect is like that of buzz sound rather than a thud. It sound really bad but still in time and functioning enough to use it to keep time. The guy on the website that fixed his w/ the codes to reset the memory banks still had the same problem.
I am using the correct plug in adapter for this pedal: 9.6v : 200ma wall wart.
So, does anyone here have any clue at all if there is a fix or something that can be done to figure out how to get the tempo guide sounds to be normal again. Probably a long shot here but really just trying to fix this thing to see if it can be done.
I am using the correct plug in adapter for this pedal: 9.6v : 200ma wall wart.
So, does anyone here have any clue at all if there is a fix or something that can be done to figure out how to get the tempo guide sounds to be normal again. Probably a long shot here but really just trying to fix this thing to see if it can be done.
Comment