Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Faulty Boss DD-3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Faulty Boss DD-3

    When i hook up my DD-3 there is sound trough, the led turns on when activated, but no delay, i've checked the zener 11v, it's fine, get's a little hot but works fine, the 5v and 9 (11 in my case) seams fine too, my gues is one of the chips is fried, any one have and idea to what chip it could be?
    Hope my limited english can be understood.

  • #2
    DD-3 problem

    You might check the jacks.My old DSD wouldn't work right when I clicked it on.I just looked inside and the jacks were sour. (wornout)Do not try to fix it your self.Take it to a repair shop,If you care about it.I chip should be ok unless you really ruff with it.

    Comment


    • #3
      Originally posted by dumbassbob View Post
      You might check the jacks.My old DSD wouldn't work right when I clicked it on.I just looked inside and the jacks were sour. (wornout)Do not try to fix it your self.Take it to a repair shop,If you care about it.I chip should be ok unless you really ruff with it.
      Thanks for you reply, but already checked the jacks and they are good, so thats not the problem, but thanks anyway.

      Comment


      • #4
        My DD-3 has been troublesome since last week. It passes the signal through ok, but delay effect is based on LUCK???? depending on the type of power supply I use. Dont get it? see below:
        (1) Using Ibanez 9V adapter - few days ago, delay effec will come out after a few seconds I stomp on it, but now, completely none or ver very very dirty/weak
        (2) 9v 6LR61 alkaline battery (NEW) - same symtomp as above
        (3) 9v 6LR61 alkaline (china made - used - taken out from my multimeter) - delay effect come out after 1-2 seconds...

        I dont have PSA adaptor to try

        Comment

        Working...
        X