Tweet
Howdi, I'm new here. I plane to bug you guys with a zillion of problems about effects diy'ing, just so you're warned.
Anyway...I just bought a broken Marshall JH-1 Jackhammer from a kid who told me that he replaced the switch 'cause he tought it was broken(???).
He replaced it, which didn't solve the problem, it just changed it.
In short: I desoldered the switch, and now I'd like to know the right way to connect it. Seemed to me the first thing to do would be assemble the pedal in the right way befor I start trouble shooting.
On a homebuild pedal I could probably figure out how to hook up a 3PDT switch to an out/in, a led and a battery, ect...
But it's a little more complivated here, the solder pads and the pcb of the JH-1 are'nt giving me much clues.
Could you guys maybe help me out somehow?
Cheers.
Anyway...I just bought a broken Marshall JH-1 Jackhammer from a kid who told me that he replaced the switch 'cause he tought it was broken(???).
He replaced it, which didn't solve the problem, it just changed it.
In short: I desoldered the switch, and now I'd like to know the right way to connect it. Seemed to me the first thing to do would be assemble the pedal in the right way befor I start trouble shooting.
On a homebuild pedal I could probably figure out how to hook up a 3PDT switch to an out/in, a led and a battery, ect...
But it's a little more complivated here, the solder pads and the pcb of the JH-1 are'nt giving me much clues.
Could you guys maybe help me out somehow?
Cheers.
Comment