Tweet
My TD-1's high gain setting sounds the same as the low gain setting. I've looked inside and it's all surface mount components. The switch itself seems okay but I didn't remove it from the circuit. I'd like to fix it but I'm not sure if it's feasible for me to work on it without a schematic available. Should I give it a try?
I don't have an oscilloscope or signal generator which would be very useful right now.
http://www.nady.com/nadyguitar/manuals/manual_td1.pdf
DirtBox Nady: TD-1 Tube Distortion | DirtBox
Amazon.com: Nady TD-1 Classic Tube Distortion Foot Pedal: Musical Instruments
I don't have an oscilloscope or signal generator which would be very useful right now.
http://www.nady.com/nadyguitar/manuals/manual_td1.pdf
DirtBox Nady: TD-1 Tube Distortion | DirtBox
Amazon.com: Nady TD-1 Classic Tube Distortion Foot Pedal: Musical Instruments