dead line6 tonecore base

[nosaj]

i have a dead line 6 tonecore base someone plugged the wrong voltage or polarity into.
part number #35-00-0015 rev b 05.21.2004

looks like L8 and c38(never seen a film cap melted in half) are toast. Is this a lost cause or does someone have any magic or something for it?

Thanks,
nosaj

[The Dude]

I don't know these things and since we don't have a schematic posted,...... most gear that uses wall warts have a protection diode at the input that shorts when the wrong polarity is supplied. The diode will be from DC input to ground (if there is one). Look for a shorted diode near the supply jack.