Hello,
this link is to the old ADA MP-1 send-return section: http://adadepot.com/mods/ada_mp1b/ADAMP1jck.jpg
I'm intrested to built an FX send-return box to best match levels between amp/preamp and digital FX.
I'm not sure to understand completely this circuit: from the ADA manual I know it's unity gain but the real basig gain should be 1.5 (send) and 2 (return) - variable under pots control, of course.
Another issue: the resistors R10-R9, R14-R7 have not the same values...so I need some help to define the numbers to cutomize at best the circuit.
Thanks!
m.p.
this link is to the old ADA MP-1 send-return section: http://adadepot.com/mods/ada_mp1b/ADAMP1jck.jpg
I'm intrested to built an FX send-return box to best match levels between amp/preamp and digital FX.
I'm not sure to understand completely this circuit: from the ADA manual I know it's unity gain but the real basig gain should be 1.5 (send) and 2 (return) - variable under pots control, of course.
Another issue: the resistors R10-R9, R14-R7 have not the same values...so I need some help to define the numbers to cutomize at best the circuit.
Thanks!
m.p.
Comment