Tweet
I have bought some time ago a 7 way looper with
1/ tuner out
2/ loop1
3/ loop2
4/ loop3
5/ loop4
6/ A/B out
7/ master bypass
I have then cut 3 switches (they were too close and this is the only reason) leaving
1/ tuner out
2/ loop1
3/ loop2
4/ A/B out
That served me well last year, but now (some free time...) I have decided to move switcher under the metal pedalboard chassis, and after drilling holes, welding and connecting everything again I have weird things going. When I hit tuner, all other lights light up, etc etc. + so many othe errors. I dont see anything wrong with the wiring. I have tried to test it today but I haven't got a clue whats going on. I could wire it all over again with a good signal wires so my question is, is there any schematic that will cover my current 4-way setup? I tried to google but I havent found anything. The closes are loopers with tuner outs but not also with A/B out switches... Can I ask for a bit help with this?
1/ tuner out
2/ loop1
3/ loop2
4/ loop3
5/ loop4
6/ A/B out
7/ master bypass
I have then cut 3 switches (they were too close and this is the only reason) leaving
1/ tuner out
2/ loop1
3/ loop2
4/ A/B out
That served me well last year, but now (some free time...) I have decided to move switcher under the metal pedalboard chassis, and after drilling holes, welding and connecting everything again I have weird things going. When I hit tuner, all other lights light up, etc etc. + so many othe errors. I dont see anything wrong with the wiring. I have tried to test it today but I haven't got a clue whats going on. I could wire it all over again with a good signal wires so my question is, is there any schematic that will cover my current 4-way setup? I tried to google but I havent found anything. The closes are loopers with tuner outs but not also with A/B out switches... Can I ask for a bit help with this?