Wiring a 3PDT to turn an effect on and off

[danielzink]

"I'm renaming it the "Geoffrey""
I love this! Maybe paint a giraffe pattern on the yellow case.

From the looks of the board and from your dissection of the original switch, what you need is a Single Pole Double Throw Momentary foot switch. Not something that will be easy to find. I've seen a lot of S.P.S.T. momentary switches used for channel switching, etc., but never a double throw version. You may have to build something that will work with Small Bear's switch activator to make this work.

So I'm browsing my favorite speaker manufacturers "other" pages and what do I find.....? about 12 or 13 down

https://taweber.powweb.com/store/sword.htm

WSW-SPDT-MPB $2.50 SPDT, Full Size Metal Momentary Pushbutton Switch, 4A/125V


hmmmmm...

sweet !!


Dan

[deluxe reverb92]

cool beans! gonna do it?

[danielzink]

cool beans! gonna do it?

Unfortunately I've got two other switches coming from other vendors.

I'll wait to see if either of those work before I order the one from Weber.

No matter what - within a week or so - the rehouse should be complete and I can start drilling the box and applying decals etc.

stay tuned !!

Dan

[danielzink]

Here ya go.....

all the labeling is decals - I haven't soaked 'em and applied 'em yet. I just wanted to get them cut out and see what placement would look like.

Everything is up and running.

Thank you all for your support.

Dan

[danielzink]

Done...