Tweet
I bought this cheap Mosky spring reverb pedal It is what it is Sounds OK.. BUT when you step on it ,it makes a huge POP!! I know that you can put a cap on it to ground ,but I dont know where... Can someone help me.. thanks DAB
-
-
Some schematic please?It's All Over Now -
Schematics for Mosby pedals are rare online. The boards are SMD which makes it difficult to reverse engineer. A spring reverb should be relatively easy to figure out.
Can you post some photos of the insides and both sides of the circuit board? No guarantee but is worth a look.Comment
-
About Mosky “spring” reverb
https://www.reddit.com/r/diypedals/comments/i2g6zv/whats_inside_this_mini_reverb/
What’s inside this mini reverb
https://www.diystompboxes.com/smfforum/index.php?topic=125075.0
Reverb - look What’s in this mini pedal...
Check (replace) footswitch.
It's All Over NowComment
-
Why do they call it a "Spring Reverb"? I guess "Digital Reverb" isn't good enough anymore.Comment
-
Imitates the sound of spring reverb tanks.It's All Over NowComment
-
I'm getting a little off-topic here. Check out this real spring with optical pickup. Watch the YT video
https://www.gamechangeraudio.com/light-pedal/
Comment
-
6 Reasons Guitar Pedals Pop When Switched
http://www.muzique.com/lab/pop.htm
Stop the LED Popping
http://www.muzique.com/lab/led.htm
It's All Over NowComment
-
Digital reverb sound replaces a traditional spring reverberation unit.
Acutronic Belton is produce as
Long reverb type (2,85s), Medium reverb type (2,5s), Short reverb type (2,0s)
http://www.belton.co.kr/product/product.html?code=002
http://diy.smallbearelec.com/Library/Datasheets/Belton_BTDR-2.pdf
http://diy.smallbearelec.com/Library/Datasheets/Belton_BTDR-3.pdf
https://www.evatco.com.au/assets/brochures/P-RBTDR-2H-X.pdf
It's All Over NowComment
Comment