Tweet
I have a Korean bridge where the trem arm height adjustment screw is missing. If someone has one of these, could you take a picture of it removed from the trem so that I know what I should be looking for. Dimensions would be a help, too. It looks to be just an M4 Allen screw, but does it also have a washer and spring?
If you also have the keeper plate that clamps over the springs on the trem block, what thickness is it?
These trems have the height adjustment screw underneath, accessible via the control cavity, unlike the earlier Japanese units.
Edit: just discovered I have a keeper plate.
If you also have the keeper plate that clamps over the springs on the trem block, what thickness is it?
These trems have the height adjustment screw underneath, accessible via the control cavity, unlike the earlier Japanese units.
Edit: just discovered I have a keeper plate.