Locking nut through neck screws

[Dansk_84]

Does anybody know the dimensions and the thread size of the floyd rose through neck screws, plus where could i obtain 2 of these screws

Any help will be greatly appreciated

Dan

[David Schwab]

M4 x 0.2 thread.

You can get them from Stew-Mac:

Neck Mounting Screws

[jrfrond]

In all honesty, I would opt for a top-mount version, which uses two wood screws to anchor the locking nut into the shelf and are subsequently hidden under the locking blocks. Why? Well, I've never really dug the idea of drilling two substantial holes into a neck in an area where there is so much tension and flexion. Yes, I have seen crack develop in this area.

[David Schwab]

That's a good idea. I'm installing one with the top mount option. It's less work too.

[jrfrond]

.....Yes, I have seen crack develop in this area.

Well, that's a "hole" other issue!