ibanez parts

[romdos]

I have an Ibanez SG copy that was made in the late 70s or early 80s. But I don't have the brigde, studs, etc. Unfortunately, I can't seem to find parts locally that have the same spacing. Anybody know where I can get hardware to fit this guitar? The stuff made to Gibson specs definitely doesn't

thanks

[Mark Hammer]

I have an Ibanez Les Paul from the same period, and you are correct that the spacing is not the same as Gibson. I'd love to get a bridge for mine. Having a bridge makes it one heckuva lot easier to play.

[spud1950]

There are online vendors that sell bridges spec'ed for import clones.The problem is most don't give any dimensions in the descriptions so you never know if it's for import or USA made.Here's a couple that might have what your looking for.

This one actually shows the dimensions for most of their bridges.

http://stores.ebay.com/SOUTHEAST-MUS...QQftidZ2QQtZkm

This vendor mentions the post hole spacing.

http://stores.shop.ebay.com/Tricked-...Q_fsubZ5823790

[David Schwab]

If you can't find a bridge, it's not that difficult to dowel up the holes and drill new ones for Gibson style parts.