Tweet
im replacing the switch in my jap strat. i have installed a crl, allparts switch, i need a diagram because i cant get the tone controls to work right. i get no tone control at the bridge pickup, both tone controls work at the middle position, one tone at the necck and middle. anyway i would like to have one tone control at the bridge and the other in the other positions.
-
-
Don't know if this is the switch that you have or not.
Check this out!
Wiring Diagram
Good Luck,
Terry"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
Terry -
that looks like it. i found diagrams on a fender site. i cant beleive it but ive got it right. there is no tone for the bridge pickup, but both tone controls are supposed to work at the same time in the middle position. so it looks like im ok.Comment
-
The bridge pickup on a Strat doesn't have a tone control, only the neck and middle. Both tone controls are not supposed to work in the middle. You have them wired wrong.Originally posted by scole View Post
Follow this:
Seymour Duncan : Strat Wiring Diagram
I always rewire the middle tone control for the bridge, and the neck tone control for the neck and middle. Or I remove the middle tone control, wire the other up as a master, and move that damn volume pot away from the strings. I hate that.It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein
http://coneyislandguitars.com
www.soundcloud.com/davidravenmoonComment
-
Comment
Comment