Tweet
If this was "my" guitar I might then use a three position blade switch to achieve some series or phase effects.
-
"Take two placebos, works twice as well." Enzo
"Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas
"If you're not interested in opinions and the experience of others, why even start a thread?
You can't just expect consent." Helmholtz -
Oops
I should have known better than to post past my bedtime.Originally posted by rjb View Post
The jumper should be between switch terminals 4 & 5 (not 3 & 4), and the output taken from that junction.
Corrected drawing attached.Attached FilesDON'T FEED THE TROLLS!Comment
-
-
I kinda doubt that balancing the blend between 2 similar pickups will be all that useful- but it's what the "customer" asked for.Originally posted by Chuck H View Post
Then again, I'm more of an acoustic kinda guy to begin with....DON'T FEED THE TROLLS!Comment
-
Cheers rjb for the drawings and thanks Chuck for the pot ideas.
I sat at my soldering iron a couple of nights ago to see what I could come up with. Having looked at rjb's drawings it turns out I was kind of on the right lines. That drawing is gonna help me ten-fold though so thanks again!!
The reason I wanted to get rid of the tone controls is that I rarely use them. I love the sound of a humbucker at its fullest (if you get what I mean). 3 volume controls would get alot more use. And who doesn't love the sound of a volume swell.
.
Comment
Comment